Perfect Fly Fishing Journal – February 2022

Index:

1. Euro/Czech Stye Nymph Fishing
2. Tips on Fishing Tailwaters During Late Winter-Early Spring Months
3. Why Use Perfect Flies
4. Aquatic Insects – Imitating Black Flies
5. Perfect Fly Selections

Euro/Czech Style Nymph Fishing

     A recently popular fly fishing method but one that has been around for years and one that goes by many different names is most recently called Euro or sometimes Czech nymphing. In recent years, it has become popular enough that rod manufacturers are selling Euro Nymphing Fly Rods. There are Euro nymph leader and special rigging and even Euro nymphs.

     The entire concept is nothing more than making short presentations using a tight-line fishing method often using a section of colored line called a sighter, weighted nymphs and means of which suspends your flies off the bottom and putting you into direct contact improving strike detection. Typically, one uses a long, very light and sensitive 2 to 4 weight fly rod with two or more flies spaced several inches apart. I’m not trying to be funny, but from a presentation standpoint, it is very similar to fishing with a cane pole.  

     Many trout anglers use a method of presenting flies to trout they call high stick nymphing which is the same technique. I have used the high-stick method for several years now, but like most other anglers I know, place the flies directly on the tippet as opposed to using short dropper tippets off the main tippet. The method allows one to present the flies in a precise area quickly as opposed to making an overhand or roll cast and allowing the flies to drift with the current and/or be retrieved to the targeted area one thinks fish are holding. An angler can get a fly in a certain target zone or area quickly, which results in covering more places or targeted areas in less time.

     Years ago, when I was fishing the BASS pro circuit, Dave Gliebe, a California angler, became highly recognized for a method he called Flippin. It was simply a method of presenting bass lures vertically. The cast is made by presenting the lure with an underhanded swing cast whereas the lure is dropped vertically at a precise point. For example, when bass are holding underneath a log or lily pads, one can present a lure in a vertical manner precisely and quickly thereby covering more target zones in less time. It was and still is a very effective method. When the technique caught on, special longer and somewhat stiffer rods were designed and built to make “flipping” easier. The method was used by another California bass angler named Gary Kline, a very successful angler I have had the opportunity to fish with twice during major BASS tournament including one he won on Lake Powell Arizona. The flipping method quickly became popular and is still used today by many bass anglers.

     Most rigs include a section of line called a sighter. A Sighter is a section of high visible line, usually made of monofilament, that is tied between a short section of leader or sometimes directly to the fly line, and 3 to 5 feet of tippet. It makes it much easier to control the depth of the flies   because you can see exactly how much line is below the sighter. For example, you may fish with the sighter only inches above the water or with it a foot or two above the water based on the depth of the water you are fishing. Nymphs can’t swim so they are always on or very near the bottom and you should keep your bottom fly very near the bottom. The overall length of the leader and tippet should be about the same length as the rod you are using. Normally, rods from ten to twelve feet long are used that range in sizes from a 2 weight to a 4 weight. 

     We will soon be selling our own brand of Euro/Czech, High-sticking fly rods in 3 and 4 weights at a length of 10 feet 6 inches to 11 feet. We will also soon be selling our own brand of rigging for Euro/Czeck style leaders and tippets. We will have these items in stock by this Spring. Like all of our own brand products, they will be of high quality at much better prices than other similar product because we won’t have any middlemen to increase the cost to our customers.   

     Euro style nymphs all have weighted head and none of the generic patterns I have seen look much like real mayfly nymphs. Real nymphs don’t have bead heads and the different species of them look as different and in many cases more different from each other than mayfly duns. I like the concept of what many call Euro or Czech nymphing which is practically the same as high sticking with tandem rigged nymphs. It can be very effective. But there is yet another problem with the Euro stye nymphs. They have fixed weights and in deep water they can be slow sinking. Depending on the current, slack or strong, they may or may not have the right amount of weight to drift behind the tippet as intended. In slack water, they may not get separated from the tippet and you would have two tippets hanging almost together. In fast deeper water, they would string out but may not have near enough weight to sink. The system works much better where you add the right amount of weight using slit shot, leaded or non-leaded types. That allows you to adjust the flies to the depth and speed of the water.

     We will soon be selling generic Euro style nymphs just for those who insist but I won’t recommend them over our Perfect Fly nymphs which look like the real things and are named after the real things. Also, I prefer to use a mayfly emerger, or a caddisfly or midge pupa fly for the upper flies. Nymphs stay on or very near the bottom. They can’t swim.

Tips on Fishing Tailwaters During Late Winter-Early Spring Months

     Tailwaters, the types that releases water from the bottom of a lake, offer a big advantage to anglers during very cold weather. They offer warmer water to fish. If the lake is deep enough to have a thermocline, the temperature of the water released from a bottom discharge average about 39 degrees F., regardless of the air temperature. If the air temperature is much lower than 39 degrees F., the water will gradually get colder the further you are fishing downstream of the discharge. Of course, if it is much warmer than 39 degrees F., the water will gradually get warmer the further downstream you fish. My tip is, if the air temperature is below forty degrees, fish the upper part of the tailwater the near the dam the better. The water will usually be warmer.

     Always, the big factor in fly fishing tailwaters to consider the strength and amount of the discharges from the dam. It can vary from too strong and high to wade to too low and slow to drift. Tailwater almost always require one to check on the amount of the discharges at the time they plan on fishing the stream. In many cases the company or government authority controlling the releases from the dam provides very good information as the times and amount of water being discharged which determines the depth of water and in other cases except from first hand reports from others, good information isn’t available. You need to learn or know the best discharge rates and water depths for both wading and floating the river including the points at which the stream is too low or too high to fish for wading and/or drifting.

     Another difference in freestone streams and tailwaters is hatches may vary according to the section of water due to the varying temperatures of the discharges due to different distances from the discharge. In warm weather, the water at the discharges near the dam is always colder than the water gets a good distance below the dam. In cold weather, just the opposite can be the case. The water can be colder the further you fish downstream from the discharges. This may result in the need to fish different flies to imitate different insects, depending on your location in a tailwater.

     During the winter months, you can just about always count on midges being one of the main foods you will need to imitate. Midges have three stages of life-the larvae, pupae and adults and you need to be able to imitate each stage. One reason they are so important is the fact there is usually a lot less food for the trout to eat during the winter months. We usually recommend fishing the larva and pupa imitations rigged in tandem with the pupa fly about 16 to 20 inches above the larva fly. The reason is that the midge pupa is the stage of life that accents from the bottom to the surface of the water.

     Other important foods you should be able to imitate in many if not most tailwaters during the winter months are leeches, sculpin, various baitfish, aquatic worms, black flies, winter stoneflies, and blue-winged olive mayflies. There are many others depending on the particular tailwater.

Why Use “Perfect Flies”

     The short and simple answer is you will catch more fish, but we realize that is a big, bold, and blunt statement. It’s also one that deserves far more justification. A much better short and simple answer is Perfect Flies resemble the real foods fish eat much better than any other flies on the market; however, that statement also deserves more justification.

     First, consider what I think is a plain and simple fact about artificial fishing flies. The more a fly looks and behaves like the food the fish are eating at the time and place one is fishing, the higher their odds of success. Perfect Flies meet those criteria better than any commercially available trout flies. Once knowledgeable fly anglers have closely examined and preferably used Perfect Flies, they rarely if ever, disagree with that statement.

     Let’s closely examine what I just called a simple fact about artificial fishing flies. I repeat, the more a fly looks and behaves like the food the fish are eating at the time and place one is fishing, the higher their odds of success.  Fish see both an artificial fly and the real foods they imitate under an infinitesimal number of lighting and background situations. To make that simple, fish see both flies and the real foods they imitate very poorly or very well, depending on many things such as the distance the fish is from the fly or real food, the background (bottom, bank, weeds, sky, etc.), the speed of the fly or real food; the speed of the water; the color of the water; and many other factors. In simple terms, they get something between a good look at the fly or real food, or a quick, poor glimpse of it. It is possible for a fish to try to eat that fly or real food item under any of those possible variations. This results in anglers being able to catch fish using flies that doesn’t look much like any of the natural foods in the water it lives in at times. It also results in an angler not being able to fool a fish with a fly that doesn’t closely resemble the natural food it is feeding on. In other words, an angler may be successful in catching a fish under either of these two conditions. It simply becomes a matter of how often and how many fish can be fooled with the fly, or an angler’s odds of success. It doesn’t take a Rhodes Scholar or a Las Vegas bookie to determine which situation would have the highest odds of success.

     I had known from years of fishing experience for many different species of fish in many parts of the world the way you catch any fish from a panfish to a marlin is to first determine what is the most plentiful and available food the fish were feeding on and then to either use that food for bait, alive or dead, or to use an artificial imitation of it. I’ll admit that process became more complicated when I started fly fishing exclusively and especially for trout due to the large number and types of food the fish rely on for survival. Quite frankly, that just made it more challenging and interesting for me.  

       I had produced videos on fishing for several years, including many on the subject of saltwater fishing that have sold more than any others world-wide. I thought I could accomplish the same thing fly fishing for trout. Later, I discovered there were many more problems with doing that than I anticipated. Angie and I quickly became frustrated in attempting to produce instructional videos on trout fishing when attempting to show close-up video of the real foods in the water in streams throughout the nation and how to match those foods with flies. We discovered that we couldn’t find flies on the market at the time that closely resembled most of the real foods and insects that trout feed on. Out of the hundreds of flies we purchased from different sources across the nation, very few actually looked like the real things they were supposed to imitate. Many of them didn’t even acknowledge what they were designed and tied to imitate. Many of them were called “pretty flies” that were never even intended to imitate any natural food fish eat. Yet another problem was that most of the flies on the market then and now are dry flies that are supposed to imitate adult stages of life of insects, even though most of the food fish eat are eaten below the surface of the water. We finally gave up on producing most of the programs we set out to produce because we couldn’t show video or pictures of flies that came close to imitating most the real foods that we were acquiring video and photos of from streams across the nation.

     We realized that we had acquired video and photos of the real foods nationwide and that one way to solve the problem was simply a matter of getting good fly tiers to come up with patterns that closely matched those pictures and video. As you may expect, that too became a big problem that took a few years, but one we eventually solved that eventually resulted in what we called Perfect Flies.

     If you haven’t used Perfect Flies, please check them out. We also sell the generic patterns, but we do not recommend them over our patterns, not because they are our patterns but rather because they are much better imitations of the real foods fish eat. By the way, they are named after the real foods they imitate as opposed to many generic patterns the names of which do not even indicate what they are supposed to imitate.

Flies

Aquatic Insects – Imitating Black Flies

    The common two-winged biting black fly is not generally recognized as an important trout food but that shouldn’t be the case. They can be very important in many trout streams, especially some tailwaters. Black Flies are true flies of the Simuliidae family. In some cases where scientific studies have been made, the black fly turned out to be the major source of food for trout. Of course, that isn’t commonly the case, but it is common for many trout streams to have good populations of the insect and wherever that is the case, they rightly should be considered important. We developed and sell Perfect Fly imitations of the Black fly larva, pupa, and adult stages of life.

     We acquired samples of the real things from the South Holston River in northeastern Tennessee, a very good tailwater trout stream. We and many of our customers have used them successfully throughout various trout streams from coast to coast. Black fly larvae live in colonies, sticking to rocks in riffles. They filter plankton from the water. Colonies can be found in very fast water.

     The naturals are small. We offer imitations in hook sizes 18 and 20. Black flies are also called buffalo gnats, turkey gnats and many other names. The larvae of the black flies require a lot of oxygen, and you will only find them in trout streams with faster moving water. They can’t survive in warmer water or polluted waters.

Click here to check out our Perfect Fly “Black Fly” patterns: https://perfectflystore.com/product-category/flies/perfect-fly-trout-flies/stillwater-misc/

Perfect Fly Selections

     We have many different Fly Selections that help anglers determine what to use at various locations and times of the year.

     Custom Fly Selections: Our most popular type of fly selections are our custom selections that anglers can acquire for specific stream locations and times. They can be purchased for a short or a long trip to any of hundreds of trout streams within the United States at any time of the season. This type of selection allows one the opportunity to set a budget he or she is comfortable with, or to choose what we call our Good, Better, or Best selections. They can select to get flies only, or to have them come with a suitable fly box. We will put the flies in the box and provide a map or plan of the box to indicate the name of the fly, or if one chooses to use their own fly box, we label the flies so one knows the names of the flies. If requested by the customer, we will make notes as to what time of the day and any specific conditions to fish each of the different patterns. The names of all Perfect Flies identify the food or aquatic insect and the stage of life that the fly imitates.  

     Year-round Fly Selections for various sections of the United States: The selections are as follows:

Central Rock Mountain Streams of Colorado, Utah and Nevada

Mid-Atlantic Streams of Kentucky, Ohio, Maryland, Virginia, and West Virginia

Mid-West and Great Lake Streams of Arkansas, Illinois, Iowa, Indiana, Michigan, Minnesota, Missouri, and Wisconsin

New England Streams of Massachusetts, Connecticut, Maine, New Hampshire, and Vermont

Northeastern Streams of New Jersey, New York, Rhode Island, and Pennsylvania

California Streams

Pacific Northwestern Streams of Oregon, and Washington

Southeastern Streams of Georgia, Alabama, North Carolina and Tennessee

Southern Rocky Mountain Streams of Arizona, and New Mexico and

Great Smoky Mountains National Park

Yellowstone National Park

Specific Types of Fly Selections: These are for selections of certain types of flies for various species of fish.

Blue-winged olive selection

Deluxe Trout Midge Selection

Deluxe Trout Terrestrial Selection

Flats Fly Selection (Saltwater)

Inshore Fly Selection (Saltwater)

Pre-rigged Dropper Selection

Pre-rigged Double Nymph Selection

Stream Selection

Steelhead Selectionhttps

Click Here to see the details of these selections: https://perfectflystore.com/product-category/flies/perfect-fly-trout-flies/pftf-selections/

Perfect Fly November Fly Fishing Journal

Contents:

1. Late Autumn/Early Winter Season Tips
2. Articulated Streamers
3. Fishing Spring Creeks
4. Winter Steelhead Fishing
5. Pre-rigged Trout Flies
6. Holiday Gifts Guide
7. Fly Fishing for Speckled Trout

Late Autumn/Early Winter Season Tips

By James Marsh

     When the first cool mornings of Fall come around, anglers come out from their airconditioned hangouts to pursue their favorite fish on the fly – the trout. Light jackets may be needed in the early mornings, but shirt sleeves are the normal attire during most of the day. Gone are the annoying biting bugs of summer. New species of aquatic insects begin to emerge from the water due to just the opposite change in water temperature from the spring season. As the water cools, it brings about new hatches of fall caddis, mayflies midge and stonefly species of insects. Terrestrial insects will still be around until the first hard freeze.

     The first hints of the late Fall season take place in the high elevations of the Rocky Mountains as early as mid-September and by the end of October, temperatures below freezing become normal. At the same time, air temperatures in the Southwestern states like Arizona remain hot during the day but begin to cool down at night. The same changes can take place on the East coast in the state of Maine as well as other upper New England states. At the same time, trout fishing in Great Smoky Mountain National Park goes into high gear with mild, late Fall temperatures. Early season snow falls may begin in the upper Rocky Mountains as early as late September but may not occur in the Southwestern states until late

December or January. The same variations can occur in the eastern Appalachian Mountains from Maine to Georgia.

     As the water temperature falls, brown trout will begin to venture out from their summertime hiding places in search for the perfect place for their redds. Rainbows, brookies and cutthroat trout will perk up with the cooler water temperatures and continue to feed from the bottom to the surface of the water as long as the water temperature remain above about forty degrees or higher.

     The green colors of summer change to beautiful shades of yellows, oranges, reds and browns. When that happens, it won’t be long before the trees and bushes lose their leaves. When that happens, many anglers fishing dry flies get frustrated when their fly keeps hanging up on the leaves. It can be frustrating but fishing dry flies on the surface with leaves can also be very effective as long as the water temperature is still in the middle to upper forties or higher. Midges and Blue-winged olives among other aquatic insect hatches. Trout quickly get used to seeing the leaves and can still pick out the emerging insects easily. The leaves can serve to distort the trout’s vision of you, your gear and leader. You just need to take advantage of the leaves as cover and target open areas to place your fly.

     Cold nights and warm days are typical of late fall and early winter, again all depending on the geographical location of the stream as well as the type of stream. Most of the time, hatches will occur at the warmest part of the day. Like the spring month, cold fronts seem to pass every few days with some days being very cold and others nice and warm. The fish usually become more action on low pressure systems with cloud cover than high pressure systems with clear skies. Just because there’s some snow showers in the forecast doesn’t necessarily mean there isn’t going to be anything hatching. It isn’t uncommon to see baetis Blue-winged olive hatches when it is snowing lightly. Generally, as long as the water temperature is in the mid to upper forties, you can expect some hatches to take place. Except for midges, hatches rarely occur in water temperatures less than the mid-forties. That doesn’t mean you can’t catch trout. It simply means most of the feeding activity will be below the surface. Having a thermometer with you and taking the water temperature at various time of the day and different types of water can be of great assistance provided you know how trout react to the changing water temperatures.

     Remember, trout want position themselves in fast water very long when the water temperature is very low. It becomes a matter of them expending more energy to swim in the fast current than they can replace with food. In colder water temperatures, trout tend to hold in slower moving water. Keep in mind there is often slow-moving water in holes in the stream bottom beneath fast moving water.

     During the late fall and early winger months, spring creeks and tailwaters offer the most stable water conditions for trout. Freestone streams, especially those in warmer climates of can also provide excellent fishing conditions but the conditions do vary much more than they do in spring creeks and tailwaters. In spring creeks, water comes from underground and is usually range from about 50 to 56 degrees. In tailwaters, especially those with discharges from deep water lakes, the water temperature remains almost constant, usually from 40 to 50 degrees. In freestone streams, the water temperature is strictly controlled by mother nature. It can vary drastically, even overnight, so keeping a close water on the weather becomes very important.

     Another big variable is the type of water you fish during the late fall and early winter months. By that I don’t mean just shallow or deep water. I also mean fast- or slow-moving water or whether you are fishing riffles, runs, pools, flats, etc.  However, selecting and fishing the better type of water is also varied largely by water temperature. In general, when water is cold, you should fish slower moving to still water. When the water is warm, say around fifty degrees, you can fish faster moving water.

2. Why Articulated Streamers

     By James Marsh

Perfect Fly Albino Articulated Sculpin

Click Here to see or purchase any of our Perfect Fly articulated streamer patterns. 

     The word articulated means having two or more sections connected by a flexible joint. Most fish, including baitfish, propels themselves forward by moving the tail back and forth. Certainly, a fly that is designed to imitate a baitfish should have a similar action and that is the big benefit of an articulated streamer.

     Our patterns are designed to move easily and freely with current and/or rod tip action. We use hollow plastic beads at the joints to help enable the movement. The flies come in single or double hook versions. Some fish regulations prohibit the use of double hook flies and some don’t. They also come with rattles as an option. Small, glass beads in a tube designed to be used with flies accomplish this by providing sounds that attracts fish. 

     Articulated streamers are fished the same way regular streamers are fished. The best places to present streamers are areas where fish have some protection and where they can hide and ambush food. They can also be effect in current seams and pockets of water; however, they are usually most effective when presented around cover or during times when the water is off color. They are effective in seams of current.

     Casting methods for articulated streamers vary depending on the weight of your fly. Articulated streamer flies are usually heavier than other types of flies. You should always select a target prior to making the cast. Cast upstream and across. The fly needs time to sink to the right depth. Try to finish the cast with the rod tip up high. You need to get your fly down to their level. Once your fly hits the water, let it sit for a few seconds. At this point, is usually helps to throw a downstream mend in your fly line. Allow the current to assist by pulling the fly down near the bank. This is especially useful if the bank is deep or undercut. When thefly heads downstream, tilt your rod tip down to as low as it can get and even allow the tip of it to enter the water if needed. You want to keep it there while you strip in line. This allows the streamer to stay deeper during the retrieve. Small two-to-four-inch strips will usually work well. Continue stripping in line until the fly is about to approach the end of its drift. Don’t work the fly back upstream against the current. Let it swing across the stream a few feet. Strikes often come at the end of the drift.

Perfect Fly Gray Leech Articulated streamer

Click Here to see and/or purchase any of our Perfect Fly articulated streamer patterns. 

3. Fishing Spring Creeks

     By James Marsh

Small Pennsylvania Spring Creek

     Tired of hearing the water is too cold or too warm, or too high and fast or that runoff is still underway?  Maybe you are tired of hearing there isn’t anything hatching. Spring creeks have clear and consistent water flow, and the aquatic environment stays relatively consistent. That all sounds good and sweet but trout in spring creeks become used to things being stable and they adjust their behavior to adapt to it. Generally, spring creeks have more food for the trout than either tailwaters or freestone streams. Trout feed more consistently and regularly as opposed to a fast water trout stream where trout can feed more opportunistically. Trout in most spring creeks are very selective. Since the water is usually smooth and clear, the trout usually get a much better look at your fly and are not as easily fooled with the artificial imitation as trout in fast, more turbulent water that only get a quick glimpse of the fly. The two different types of water, meaning fast and turbulent versus slow and smooth, presents another problem to anglers. In spring creeks, the trout can usually see you, your fly rod, line and leader much better as well as your fly.

     A spring creek is a stream formed by water “springing” from underground to the surface.  They eventually get some of their water from surface runoff from rain and snow but the majority comes from beneath the surface. Most of the spring creeks in the eastern U. S. comes from a formation of limestone that runs along the Appalachian Mountain range. This water has a high or alkaline PH which supports a lot of food for trout.

     Irrespective of the type of spring creek, they all have a steady flow of water that usually remains consistent year-round. Contrary, freestone streams are subject not only to runoff but heavy rain as well as drought conditions. The flows and the clarity of the water can change drastically overnight. Tailwater flows are also usually inconsistent due to electrical power demands or flood control measures. When you regularly fish freestone streams or tailwaters, you constantly have to change methods or presentations to adapt to the changes in water conditions. When you are fishing spring creeks, you basically face the same challenges in water conditions day to day.

     Many of the spring creeks in the western states come from basalt which is porous rock that was left from volcanic eruptions. Several of these exist in Yellowstone National Park such as the Firehole River. Others in the western states come from rivers that flow beneath the surface of the earth and re-emerge from beneath the surface as spring creeks. 

     Just about all spring creeks have soft bottoms that usually consist of soil, mud or fine gravel mixed with soft soil. Aquatic plants usually grow prolific. They range in water temperature from about 50 to 56 degrees year-round. Of course, the stream begins to warm up some in the heat of summer when it gets a good distance from the source of water or in winter, can get colder a good distance from its source. In all cases, much of the stream can be fished year-round. In some cases, more smaller streams exist along the stream a good distance from the main source which helps keep the water at a more constant temperature throughout its length.

     Typically, you should use lighter tackle than you normally would in other types of water where trout exist. This isn’t necessarily because the fish may be smaller but because the fish can see everything much clearer than they normally can in a freestone stream or tailwater with fast flowing and more turbulent water flows such as runs and riffles. Often, more precise presentations and better drag free drifts are required than they are in other types of water. It certainly helps to improve your odds of success if you use flies that closely resemble the naturals. That is why our Perfect Flies are so popular in Spring Creeks. We have high volumes of sales wherever spring creeks exist because anglers learn quickly, they are far more effective than the typical generic patterns simply because the trout can see the fly better.

     Spring creek trout are very skittish. Some spring creeks have some overhead cover of trees and bushes but most of them don’t. Most trout are afraid of predators from above the water. Shadows cast across the water usually sends them to the nearest cover in a heartbeat. Walk slowly and as low as possible along the bank and crawl on your hands and knees if you have to. Approach the water you’d like to fish carefully staying as hidden as possible. If your wading, wade slowly and get into position as gently as possible. Take advantage of any cover such as bushes or trees. Boulders and large rocks are not common in spring creeks but if they do have any, take advantage of them as cover.

     In fast-flowing freestone streams with broken pockets, riffles, and runs, you may can high stick nymphs and/or use the Czech nymph rig effectively but this isn’t a very effective method when are fishing a slow, moving spring creek.  You would end up spooking every fish in the stream and the trout would stay hidden for the next hour or two.

     One successful strategy in some cases is to cast to fish you spot before the fish spots you. Sight fishing isn’t exactly easy to do, but it can be very effective. To do this, you will need a good pair of polarized sunglasses. Take your time and carefully scan the water to find fish. Watch for rises or just rise rings. Often, just a   quick flash of a feeding trout will give away a trout’s position. That is usually all you seen when they are feeding on emerging insects. It is often easier to spot the trout’s shadows on the bottom of the stream than the trout itself.

Some spring creeks, such as Penns Creek in Pennsylvania, do have rocks and boulders and in those types of water, both strike indicator rigs, high sticking methods and Czech-style euro nymph rigs can be used effectively; however, I personally don’t think they are as effective as a basic traditional nymph rig.  In most all spring creeks the water is very clear, and the surface is very smooth. Any unnatural disturbance on the surface of the water will spook the trout. Whenever possible, avoid using strike indicators. Personally, I never use them in a spring creek but there are streams where they could be used effective.  A good, rather long, knotless tapered leader with a very tiny split shot and a single fly is the best option in most cases. A fly line is easy for trout to see in clear, smooth spring creeks and in many situations, you should have a longer than normal leader than you may need otherwise. You want to as much space between your fly line and your fly as possible but not so long that you have trouble straightening it out. If you’re fishing nymphs or other subsurface small flies, you may want to use nothing smaller than a fluorocarbon 6x tippet. For small dry flies, stick with a 6x nylon tippet.

     You want to look for water that allows you the opportunity to get a drag free presentation. Most spring creek have a huge and productive insect population. The same is usually true of the trout population. They too are usually dense. It is best to try to find runs that makes it easier for you to get a good drag free presentation. Selecting runs that allow for the right drift line is a big plus. Just moving a few feet to a different position can sometimes change the drift just enough to get fish to take your fly.

     In summary, get your thermometer out, check the water temperature and then make your decisions as to the type of water to fish in the stream you are fishing. Provided you are familiar with aquatic insects and other trout foods, it is also a big aid in determining what is hatching.

Click Here for Perfect Fly Trout Flies

4. Steelhead Fishing

     By Alan Snyder

Chris Tobias with a Great Lakes Winter Steelhead

       For the benefit of those who may not know what a steelhead is, lets first cover that topic. A steelhead is essentially an anadromous rainbow trout (Oncorhynchus mykiss), or trout that have migrated to the ocean, grown to a large size and returned to spawn in the same freshwater system they were born in. Their ability to return to the same freshwater system where they were born is an amazing thing. It’s like they have had built GPS centuries before man. Steelhead spend the majority of their life in the ocean or Great Lakes, feeding on larger size food that inland trout have available and is the main reason they grow to much larger sizes. Unlike salmon, they don’t die when returning to freshwater after spawning. Steelhead may return to the ocean or Great Lakes multiple times. When they do return to freshwater, they provide a very good sportfishing challenge for the fly angler.

     There are basically two types of steelhead. Wild and/or native fish as well as hatchery steelhead. Hatchery steelhead are hatched in man-made hatchery ponds. Most hatchery fish have their adipose fin-clipped such that that they can be identified and harvested by anglers. A “Wild” steelhead refers to any steelhead that was hatched in the river system and usually have wild parents. While wild and hatchery fish may look almost identical (minus an adipose) they are genetically different and will have very different levels of success creating the next generation. It is no surprise that more recent studies have shown that hatchery steelhead and salmon can have a hugely detrimental effect on wild steelhead and salmon.

     Steelhead also differ within the species itself. They can have a very diverse life history. Each strain may be a little different. Some grow larger than others, some act differently, even grow differently. One main difference is the timing of the runs. Anglers refer to them as either a summer run steelhead or a winter run steelhead. The main difference between the two is summer steelhead enters the freshwater when they are sexual immature. Winter run steelhead enter the river sexual mature. The summer fish typically enter rivers anywhere from May to November, which is highly dependent on the specific river. They develop and mature for several months in the river system. This added time allows them to travel further to spawn than the Winter run fish.

     Summer steelhead are always more aggressive and will take dry flies. Summer steelhead are also smaller than the winter steelhead. Summer run fish spend much more time in freshwater than winter run fish. Winter fish may be in the river system only for a few days, and summer fish may be in the freshwater system over a year. Winter fishing conditions such as snow, icy roads, and high rivers make winter fish harder to find and catch.

     Skagit lines are used to present the larger flies. Sink tips are used to break the surface tension and to get the fly down in the water. Winter swing fishing requires shorter rods, shorter Skagit heads, and shorter leaders.

Click Here to see Perfect Fly Great Lakes Steelhead Flies

Click Here to see Perfect Fly Pacific Steelhead Flies

Click Here to see Perfect Fly Steelhead Fly Rods-regular and switch rods/reel

5. Pre-rigged Trout Flies

     By James Marsh

     The older I got, the poorer my vision became. That is generally true of us older guys and gals. Poor vision can also be a problem for many even at a younger age. Rigging and tying small flies became more and more of a problem for me and often, I had to rely on my much younger wife Angie, to do my rigging and tying, especially when it became necessary out on the water. Of course, the small the flies and lighter the tippet, the tougher they job becomes for anyone with poor vision. Fly sizes in the 20’s become more difficult for those with good vision. This is especially true if the rigging and tying in needed while you’re out on the water fishing. Low light conditions from early mornings to late afternoons as well as cloudy conditions also makes it more difficult.

     For those anglers short on time and/or those anglers who have a difficult time of pre-rigging their flies due to vision problems, we offer several different types of pre-rigged flies. We first began to do this with our Perfect Fly midge patterns.

Click Here for Pre-rigged Midge Larva and Pupa

     A couple of years ago we started offering pre-rigged dropper rigs which have a larger size dry fly on top with a nymph or emerger spaced about 18 inches below it. These quickly became very popular.

Click Here for Pre-rigged Dropper Rigs

     About the same time, we began to offer pre-rigged double nymph rigs. They have three feet of tippet above the top fly, which is a nymph or emerger, with a second or lower fly, another nymph or emerger, spaced 16 inches below the top fly.

Click Here for Pre-rigged double nymph rigs

     For the above reasons, it is always best to pre-rig your flies as much as it is feasible to do so prior to getting on the water. This is true of anyone with good or poor vision. For those anglers that want to do it themselves, we sell two sizes of round foam rigging spools, flat foam rigging boards, and two sizes of fly boxes with rigging spools.

Click Here for Pre-rigging Flat Foam Boards

Click Here for Pre-rigging Round Foam Boards

Click Here for Pre-rigging Fly Boxes and Spools

6. Holiday Gift Guide

Our Number One Most Popular Gifts: Our top selling fly-fishing gifts are our Perfect Fly Selections. They come with or without fly boxes.

Selections of flies are available for the following sections of the United States: They come in good, better and best selections for: New England States. Northeastern states, Mid-Atlantic Streams, Southeastern Streams, Mid-west and Great Lakes Streams, Northern Rocky Mountains, Southern Rocky Mountains, Pacific Northwestern Streams, and California Streams, Great Smoky Mountains Selections, and Yellowstone National Park Selections.

We also offer Custom Selections for Particular Trout Streams and Lakes. You can email or call us and purchase fly selections for any major trout stream or lake in the United States. They come with or without fly boxes and in good, better and best price options.

We also offer different price ranges of: Steelhead Fly Selections, Saltwater Fly Selections, Streamer Fly Selections, Terrestrial Fly Selections, Midge Fly Selections, Pre-rigged Dropper Selections, Inshore Saltwater Fly Selections and Saltwater Flats Fly Selections.

Click Here to see the details of all fly selections

Click Here to see the details of other freshwater bass, pike, panfish selections

Our Number Two Most Popular Gifts: Our number two top selling items are our fly rods, fly rod/reel/line combinations, and Getting Started Fly Sets.

Click Here to see the details of our fly rods, fly rod combinations and Getting Started Fly Sets

Click Here to see all our Perfect Fly Products

Help Us Get Your Gifts Delivered on Time

You can’t watch, hear or read any form of media -TV, radio, newspaper, or Internet, without seeing adverse reports about product shortages and shipment delays with emphasis placed on the upcoming holidays. We are and have been taking steps to prevent running out of product by ordering and/or manufacturing our products well in advance of normal schedules. Please help us get your orders out fast and delivered on time by simply placing orders in advance of normal.

7. Fly Fishing for Speckled Trout

By James Marsh

The late Tom Mann and James Marsh with a nice, speckled trout

     The Speckled Trout, or Spotted Seatrout, Cynoscion nebulosus, are found in the southern United States along coasts of Gulf of Mexico and the coastal Atlantic Ocean from Maryland to Florida. Despite the use of the name “trout”, they are not actually trout but rather members of the drum family of fish. speckled trout from its close relative, the weakfish (also known as gray trout, yellowfin trout, and sea trout). They have a distinct pattern of black spots along the silvery, upper body. They also have a very prominent set of two fang-like teeth in their upper jaw. You do not want to grab a speckled trout by the lips like you might land a bass. You get some bloody fingers. Speckled trout can grow to length of up to 34 inches and weighs of up to near 20 pounds, but fish that size are very rare.

     Along the Gulf Coast, the speckled trout follows schools of shrimp which typically come into the bay and back waters in October or earlier. Along the Atlantic coastline, trout feed mostly on migrations of baitfish such as mullet and scaled sardines typically following them into coastal bays. Specks are usually found in relatively shallow water. Grass beds, oyster bars, creek mouths, dock pilings, stump fields, and drop-offs, generally in less than 10 feet of water. Young, speckled trout can be found in very shallow tidal creeks and weed beds. Their shallow water habitat makes them a good species to catch on the fly rod.

     Many anglers think that fly fishing for saltwater species takes rather heavy tackle such as eight to ten weight fly rods and lines. That is way too heavy for speckled trout. I prefer a 6-weight fly rod and line. There isn’t anything wrong with a 5 or 7 weight rod and line. Yes, you may hook a large size redfish, snook or other species but that’s the exception, not the rule. You should size the rod and line to the flies you are using and a 6-wight should cast any of them you should be using, even for gator trout. By the way, a gator trout is just a name for a large, speckled trout.

Leaders should be long. We recommend twelve feet as it reduces the chance the fish will see your fly line. It keeps the tip of the line far enough away from the fly to keep from spooking the fish. It also lets you place the fly further past the fish without spooking them. This keeps the tip of the fly line further away and allows you the opportunity to drop the fly further past a fish, without them realizing it.

Content

Streamer Fishing For Trout

Perfect Fly Pre-rigged Flies

Fly Fishing For Trout In Tailwaters

Featured Streams – Streams Of Great Smoky Mountains National Park

New Product

Streamer Fishing For Trout

Talking to anglers almost everyday of my life, I commonly hear concerns when it comes to fishing streamer flies. Some don’t even have a clue as to what foods some of them imitate. A wooly bugger is an old generic standby streamer fly pattern many anglers have heard of, yet few know what it food it was designed to imitate or for that matter, what species of fish it was intended to imitate. It was designed to imitate a hellgrammite, the large insect larva of the Dobsonfly. It is true that streamers require completely different techniques and presentations than dry flies, wet flies or nymphs. This is being written near the first of the Fall or Autumn season when streamers become even more important than during other times of the year and hopefully, it will answer a lot of questions and concerns many anglers have about streamers.

A streamer is designed and tied to imitate a “bait-fish”, or a smaller fish that larger fish generally feed on. Examples are sculpin, minnows, leeches, crayfish, and other foods fish feed on. They are fished with an active retrieve as opposed to a dead drift like many other presentations require. Movement of the fly is mostly caused by the angler stripping in line and in some ways resembles the way lures are often fished using casting and spinning tackle. Big fish eat little fish and streamers that imitate small fish often catch large fish. This is the main reason why streamers are a popular type of fly.

The best places to present streamers are areas where fish have some protection and where they can hide and ambush food. Example are undercut banks, behind large rocks and boulders, and around submerged logs or trees. They can also be effect in current seams and pockets of water. They are usually most effective when presented around cover or during times when the water is off color. They are effective in seams of current. A current seam is the sometime visible but more often an invisible line of the water where two speeds of the current meet. This often creates a small pocket of water where fish watch for food and conserve energy.

Streamers require a different type of cast than most other presentations. Casting methods vary depending on the weight of your fly. Streamer flies are usually heavier than other types of flies. You should always select a target prior to making the cast. Cast upstream and across. The fly needs time to sink to the right depth. Try to finish the cast with the rod tip up high. Most of the time, the streamer needs to be fished near the bottom, usually but not always, in the deeper water. Under turbulent flows there is usually calmer flows. Trout won’t hold in strong current. They will expend more energy than they can replace with food.

You need to get your fly down to their level. So, once your fly hits the water, let it sit for a few seconds. At this point, is usually helps to throw a downstream mend in your fly line. Cast across the stream close to the bank. Allow the current to assist by pulling the fly down near the bank. This is especially useful if the bank is deep or undercut. When the fly heads downstream, tilt your rod tip down to as low as it can get and even allow the tip of it to enter the water if needed. You want to keep it there while you strip in line. This allows the streamer to stay deeper during the retrieve. Small two to four inch strips will usually get the job done. Continue stripping in line until the fly is about to approach the end of its drift. Don’t work the fly back upstream against the current. Let it swing across the stream a few feet. Strikes often come at the end of the drift.

Well designed and tied streamers also have built-in action whereas the components of the fly move with the current as well as with the movement of the fly the angler adds. Most of our Perfect Fly streamers use materials that tend to move with the slightest amount of current. This just makes the fly appear more realistic.

Many anglers get confused when it comes to selecting colors of streamers. First and foremost, they should match the item they are intended to imitate. Of course, different colors and clarity of water and sky conditions vary the way trout see the streamer. My rule of thumb is to use dark shades of the color of the item you are imitating when the skies are dark and/or the water off color, and to use light shades of the color of the item you are imitating when the skies are bright and the water clear. You want the fish to see the fly. You just don’t want them to see the fly well enough that they can detect it isn’t real or alive.

If you fish from a drift boat, presenting streamers requires some different tactics. Since the boat is going near the same speed as the current, a streamer presented as I previously described or up and across, would not swing down and across the same as it would when you are wading. You should cast the streamer upstream of but near the bank or other places with cover likely to hold fish and allow it to drift past the area likely to hold a fish. Some anglers use a strike indicator when presenting a streamer in this manner.

Retrieves can vary from a couple of hard strips and a pause, to a strip, pause, strip, pause type of cadence. If you are not catching anything, before you decide to tie on a different streamer, first try changing the cadence of the retrieve. Presentations need to change with different types of water as well as the type of fly you are using. Fast pocket water usually just gives you a chance to hit a spot and let it sink into the zone with a couple strips before the fly is out of the fish’s field of view. Other times you may be in slower moving water or water with overhead cover such as logs and it may work better to let the fly land just above the target and to let it drift into the strike zone. In deeper water or fast water, It is often critical to get your fly to sink quicker and swim deep all the way back to the boat. To do this in fast water, make a cast and immediately mend the line as it lands. It help to keep the rod tip deep in the water to help pull the sinking line down. This gets the fly deeper quicker and keeps the fly swimming deeper as you retrieve it back to the boat. Keep the fly coming all the way to the boat. Often a trout will hit it when you stop the retrieve very close to the boat.

Streamers for trout can be rather large, some as long at six to eight inches. It all depends on the particular type of food you are trying to imitate. Size range from those imitating small minnows to large bait fish, sculpin or leeches.

Rod sizes for streamer vary depending on the size and weight of the streamer as well as the size of the fish you anticipating catching. Six to eight weight rods are used mostly for trout. You want the rod to help you consistently deliver flies to the target with the least amount of effort. Casting streamers for a few hours is a lot like pure work. This is especially true when you are casting large flies and sinking lines for a long period of time. Heavier line weights tend to make the job easier. Fly line selection is often overlooked, but it’s just as important as choosing the right rod. When choosing a line for streamer fishing, consider the length of the average cast you will be making as well as how quickly the fly and line needs to sink after it hits the water? Will you be fishing fast deep water or fast shallow water? Will you be fishing slow moving deep water or shallow moving deep water. When choosing a line, it often pays to use running lines that don’t coil and tangle with sinking heads that deliver large flies to the target with as little effort as possible.

If you haven’t fished a sinking line, I suggest you practice it. It takes a little getting use to. In many cases, it helps to be able to make a haul cast. When you are fishing large flies and sinking lines, you don’t want to do much false casting. To get a fly down deep and quick, use a short leader. Leaders only three to five feet long are commonly used. This pulls the fly down with the line as it lands and swims. In many cases, longer leaders are best. This is true of streamers fished in shallow water. Tippet size depends on the stream flows and water clarity as well as the type of streamer being fished.

Perfect Fly Streamers for Trout

Generic Low Priced Streamers

Great Lakes Steelhead Streamers

Pacific Steelhead Streamers

Great Lake Salmon Streamers

Pacific Salmon Streamers

Perfect Fly Pre-Rigged Flies

I don’t know anyone who likes to rig flies while wading. I don’t know any who like to rig dropper rigs, double nymph or midge rigs while sitting on the bank. Most anglers pre-rig the flies at home or in their cabin, camper or motel/hotel room. In fact, I don’t really think many anglers enjoy rigging them anywhere and would much prefer to purchase them already rigged. We first started offering our midge larva and pupa pre-rigged on tippet whereas the larva is the bottom fly with the larva fly positioned about sixteen inches above the larva. That allows you to keep the larva fly on or near the bottom of the stream and the pupa fly above it imitating the the pupa accenting to the surface of the water. We include about two feet of extra tippet above the pupa fly so it can easily be tied to a leader. As a result, our midge sells rapidly increased. The pre-rigged midges are obviously very popular. We were able to keep the price low because our people have a set up that measures and cuts the tippet material for it that speeds the process up as compared to someone who just sits down and does the rigging. As a result of the popularity of the pre-rigged midges, we added other options. There is an option as to whether to use size 20 or 22 hook sizes of our Perfect Fly midge patterns. Another option is to choose from nylon tippet material or fluorocarbon.

After seeing the popularity of pre-rigged midges, we started offering pre-rigged double nymph rigs. They come with various combinations of nymphs. Noticing the increased popularity of dropper rigs, we decided to start selling pre-rigged dropper rigs. They come with a dry fly tied on about three feet of tippet material with an sixteen inch long extension of the tippet with a nymph which is the bottom fly. The come with several options of different dry flies and nymphs. These proved to be just as popular as the pre-rigged midges.

Pre-rigged Perfect Fly Midge Larva and Pupa

Dropper Fly Rigs

Pre-rigged Double Nymph

Fly Fishing For Trout In Tailwaters

Trout streams are usually classified in three different categories, tailwaters, freestone streams, and spring creeks. Each of these different types of streams typically supports different amounts of oxygen, vegetation, and entomology. A tailwater is classified as a dam controlled section of water. The dam controls the flows and for the most part, water temperature. Dams are controlled by man and computers which typically regulate the discharges from the dam.

Finding fish in tailwaters requires some different approaches than finding fish in freestone streams. It is the same in the sense you want to look for are areas fish can hide and feed without spending more energy than they can replace with food. High flows results in swift currents that control where the fish feed. In many tailwaters, the first place you should look would be the banks, but tailwater banks vary greatly and that may not be the case in some situations. There are vertical banks with undercuts sections, plain vertical banks, sloping banks of varying degrees, shallow banks and deep banks. If you are floating a river, you may encounter different types of banks throughout the float. Banks with areas of depressions or cuts often provide good holding areas for trout. Some banks have heavy current and others almost still water. Some banks have rocks and boulders on them, others are slick and clear of anything. You want to fish the banks that have the most structure or cover for the fish to hide and ambush prey.

There are many other types of cover in tailwaters. Many have ledges out in the stream that are located various distances from the banks. Most of these type of areas are the old river bed banks. When the discharges are up, they are submerged and provide good holding places for fish to feed. Many tailwaters have bottoms with holes where fish can get out of the main current. Others have rocks and/or boulders that are underwater. They can provide protection from the current where the trout can hold and look for food coming downstream. Some tailwaters have grass beds that hold fish. Various types of vegetation can provide areas of good opportunity.

In many cases, especially on tailwaters not familiar to the angler, it is best to make long cast to the banks and fish them back to the boat or wading angler. This provides a way to cover lots of water in a short amount of time. In cases where the angler knows what cover and holding areas are located below the surface, it is wise to make more accurate presentations of shorter distances in order to cover the most potentially productive water. Sections of a river that are deep and wide have less current speed than those with shallow, narrow sections that has more speed.

Retrieves should vary depending on water color, stream flow, water temperature, and sky conditions. Again, you want the fish to be able to see your fly. You just don’t want them to see it well enough to realize it isn’t food. A hard strip and long pause technique allows you to fish tight to cover and along the contours of the river bottom. It also allows you to keep the rod tip deep in the water as the fly approaches the boat. Slow moving water provides a greater challenge than fast moving water. It is more difficult to fool the trout. In fast water, fish have a short time to respond when seeing a fly. It must respond quickly to catch the food. The fish respond quicker. When the fish can see the fly for a longer period of time in slower moving water, they get a much better view of the fly. They become more selective and less opportunistic.

Our Fly Fishing For Trout In Tailwater DVD covers the the special considerations that must be given to tailwaters in order for one to be consistently successful fishing waters where both man and nature can affect the conditions. The program covers a wide variety of streams across the U. S. from East to West, including scenes from over thirty blue ribbon tailwaters.

Fly Fishing For Trout In Tailwater DVD

Featured Streams – Streams of the Great Smoky Mountains National Park

Even though Great Smoky Mountains National Park is the most visited National Park in the nation, many anglers are not aware that is has over 2900 miles of streams most of which offer excellent fly fishing opportunities. Many that are aware of that fact are not aware of the diversity of the fly fishing opportunity. There are two species of wild trout – the rainbow and brown trout. There is one native trout, the Appalachian brook trout. There are also smallmouth bass in the lower elevations of of some the streams. None of the streams inside the park are stocked. The park is located in both the states of North Carolina and Tennessee. Fishing license of either state work in the park regardless of the particular state you happen to be fishing.

The park is a part of the Appalachian Mountain Range that runs from Georgia to Maine. While the highest elevations are not as high as those of the Rocky Mountains, it doesn’t seem like there is that much difference. For example, if you fish the Rocky mountains from Denver, Colorado, you may fish at elevations up to 10,000 feet or so, but you are near the 6,000 ft or higher elevation when you start. That represents a 4,000 foot difference in elevation. In the park you may start depart to fish from Gatlinburg, Tennessee, at an elevation of about 1200 feet but fish brook trout streams that are over 5,200 feet in elevation. That is a 4,000 foot difference. In that respect, there isn’t that much difference in the two different locations.

There would be little benefit in my repeating many of the things already written in many pages of my website on fly fishing the smoky mountain park waters. All the streams are thoroughly covered. The fish species, streams that hold them and information specific to fishing for them are thoroughly covered. The tackle, gear, foods including the aquatic and terrestrial insects, flies to imitate them is covered. I don’t think we are missing any important information at all but if so, please let us know. I invite you to review the website, bookmark it and to take advantage of its year-round fly fishing opportunity.

www.flyfishingsmokymountains.com

New Perfect Fly Product

Waist Pack:

Waist Packs are alternates to the fly vest. The “Perfect Fly” Waist Pack is one that can carry almost everything a large fly vest can carry.The Waist Pack’s shoulder strap is very wide and padded so that it distributes the load equally and comfortably. The back has a strap for attaching a landing net. The waist pack can also be worn using the adjustable waist strap. Both the waist strap and shoulder strap can be used but either one of them will support it comfortably by itself. The back of the waist pack is ventilted so it stays cool and comfortable against your waist.

There is a foam fly storage compartment inside the front zippered pocket. It will hold up to 120 flies. The adjustable shoulder strap is wide and padded.It support the weight of the small waist pack comfortably. The adjustable waist stap also will carry the pack comfortably. Some pockets are lined with vinyl so they can be cleaned.

There are numerous places to attach about any device to the waist pack that you can think of or would ever need for fly fishing. They consist of various type of rings, eyes and retractable snaps.

Features:
Size: 6 x 9 x 21/2 inches

Zippered Compartments:
3 large ones. One folds down with a foam fly storage.

Vented Pocket
2 each

Shoulder Strap: Large Padded and Vented

Numerous places to attach various fly fishing items:
Includes 6 each straps plus a larger strap on the back of the pack. to attach many different types of items such as a fly floatant holder, tippet dispenser, etc.

Click to see additional Information on the Wader Lanyard

On Sale for $39.95, regular $59.95